|
Post by paterson00 on Jul 25, 2010 13:34:43 GMT
Looking at the line overview I have loads of questions popping up.
1. What are the green diamonds and arrows with the letter N in them near the points? My guess is they are an indication of the way the points are sitting and the arrow and diamond indicate the directions available over the points ie the arrow representing only one way traffic but the diamond representing bi-directional travel across the points.
2. When looking at the platforms, what does the circle with a cross across it represent. Sometimes these are White and sometimes they are black.
|
|
|
Post by paterson00 on Jul 25, 2010 13:42:06 GMT
Also what do the black triangles on the platforms represent on the line overview.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2010 2:04:58 GMT
AFAIK the N symbol and the arrow indicate which lie of the point blades is "normal".
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2010 17:16:42 GMT
The black triangles on the platforms represent Hold.
The circle represents the Platform Emergency Stop Plunger status, and the X through it means that an override has been applied to it.
All the PESPs have been linked out in the Signalling Equipment Room, but the software is still in the system so that's why they still show up on the screen.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 7, 2010 20:24:32 GMT
I think the N with the arrows is to do with junction modes, i.e. N-Normal, F=First Come First Served, etc
|
|