|
|
Post by tubelightonline on Feb 6, 2009 20:28:55 GMT
What is the procedure for closing down the cab of an A Stock train - I only ask as I've noticed T/Ops briefly reaching down into the space below the controls; presumably to operate a button or lever located in that area, and not simply to tie a loose shoelace!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2009 2:25:35 GMT
Brake handle to emergency.
Close DBVIC (Which is where they bend down , as it's near the drivers feet)
When the trainline needle shows s zero, Brake handle to release.
Switch off headlights and on taillights and stabling light.
Leave cab.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2009 8:39:39 GMT
Brake handle to emergency. Close DBVIC (Which is where they bend down , as it's near the drivers feet) When the trainline needle shows s zero, Brake handle to release. Switch off headlights and on taillights and stabling light. Leave cab. You also have to remove the control key and take it with you before you leave the cab. |
|
Chris M
Global Moderator
Forum Quizmaster
Always happy to receive quiz ideas and pictures by email or PM
Posts: 19,383
|
Post by Chris M on Feb 7, 2009 11:31:03 GMT
what does DBVIC stand for? I pesume the B is "brake" and the "IC" "Isolating Cock" but the D and V?
|
|
|
|
Post by setttt on Feb 7, 2009 12:00:04 GMT
what does DBVIC stand for? I pesume the B is "brake" and the "IC" "Isolating Cock" but the D and V? Driver's Brake Valve Isolating Cock |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2009 18:39:08 GMT
You also have to remove the control key and take it with you before you leave the cab. Yes, I have forgot that on more than one occasion  |
|
|
|
Post by tubelightonline on Feb 8, 2009 20:44:15 GMT
I bet the walk back to the other end in order to retrieve the key seems to take forever as well!
Thanks for the information on this procedure; it's greatly appreciated!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 8, 2009 22:10:08 GMT
Brake handle to emergency. Close DBVIC (Which is where they bend down , as it's near the drivers feet) When the trainline needle shows s zero, Brake handle to release. Switch off headlights and on taillights and stabling light. Leave cab. Just to add,including control key, turn cab-light switch to on. (Nothing worse than opening up a cab and getting surrounded in darkness  ) |
|
metman
Global Moderator
5056 05/12/1961-23/04/2012 RIP
Posts: 7,400
|
Post by metman on Feb 8, 2009 23:01:14 GMT
......and change destination blind!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2009 18:49:15 GMT
Close cab door?
That's a jog I've had to do twice!!!
|
|
)
